|
#1
|
|||
|
|||
jdm plastic headlight de-yellowing: guide
1) with a normal kitchen sponge, using abrasive side apply copius amounts of brasso, leave for a few minutes
2)give them a good rub with the abrasive side to remove the hard stuff 3)clean down, and with a damp cloth and 1200grit sandpaper, give them a good wet sanding, wipe off and repeat 2 or 3 times 4) now do the same with 1500grit 5) repeat without the wet cloth (i.e. dry) 6) apply brasso with the sponge again, leave for a few minutes and polish off with polishing cloth 7) repeat this a few times, i did 3 times. 8) apply car polish (i used autoglym super resin polish 9) allow to dry and polish off with clean cloth 10) repeat until happy finished did mine over the course of two hours and cant believe the difference. will post photos when i have time
__________________
-james d15b 1.5x JDM |
|
|