1989 EF7 Restoration

[kdevitt]

The initial purchase of the foam tape was to repair the main vent on the dash.

These tend to get brittle with age and break up - as obviously happened here



Quick cleanup -



I couldn't find a pre-cut gasket for this - hence the foam tape. Not totally perfect - but better than nothing, and should assist in it sealing off against the main vent.



New pedal rubbers were also stuck in - the accelerator is definitely trickier than the brake and clutch - its more solid plastic than rubber, so wasn't done at this stage.

Bit of rustoleum paint on the pedal assembly -







With the wiring run, and almost everything working as it should - the dash could go back in.