![]() |
#1
|
|||
|
|||
![]()
Getting ready to put a new steering wheel from MOMO in my REX, was wondering if anyone has done a steering wheel swap and if you have any suggestions. I got the wheel from a friend who was going to install it on his mini-truck but never got around to it for $50 and its in awesome shape, never been used. I know that I have to order the hub also and I've looked it up on ebay. Seems that its gonna be about $60 for that. If anyone has some suggestions on installation I'd appreciate it!
__________________
Flint Black \'91 USDM Si |
#2
|
|||
|
|||
![]()
Yeah, it's pretty easy, apart from connecting the horn button
- Straighten the steering wheel - Ease off the H symbol with a knife/screwdriver - Undo the nutt - Making sure the steering wheel is still straight, pull it off - Align the hub and new wheel on the car so that the stering wheel is straight - fasten the nut back on - You need to connect up the horn button wires. I think one goes on to a nut inside the hub and the other should be flush against the hub itself - I put one between the hub and the wheel. experiment before your fit the wheel - put on the wheel & bolts and tighten them up carefully (each one a bit at a time) - Admire your handywork/have a beer
__________________
Mark \'91 Black SiR <- Back on the road!! \'92 Red 1.5x (sold) |
#3
|
|||
|
|||
![]()
im getting a momo trek r chrome and quick release boss for a b-day present , anyone any experience with these , from looking at bits an pieces it dont seem as straight forward as above . ( what im really saying is mark , bring your screwdrivers etc on sat
![]() ![]()
__________________
i will finish this car , eventually . |
#4
|
|||
|
|||
![]()
I changed mine out and mccoffey was pretty much right on the money. After you pry off the "H" symbol there's a nut inside that holds the actual wheel on. Pretty much do as it says above. The horn button wires were really simple to connect up. Obviously you had to get a quick disconnect wheel hub but there should be a spot on it to connect the grounding wire to, and the horn button on the steering wheel should have a spot to plug up the stock power wire to. It's actually really simple. Hope it works out easy for ya!
__________________
Flint Black \'91 USDM Si |
#5
|
|||
|
|||
![]()
Well, that last post of BEECEE's was a year ago, so it's well and truly installed at this stage.
![]()
__________________
Black 92 JDM 1.5X....R.I.P. White 91 Irish 16V...SOLD Black 91 JDM siR.....Re-sprayed and re-upholstered!! Red 90 UK VT Turbo...Stolen [ ![]() |
#6
|
|||
|
|||
![]()
haha yeah wow, I didn't even read the date on that last post from beecee...alrighty then, well glad to hear it's a nice one!
__________________
Flint Black \'91 USDM Si |
![]() |
Thread Tools | |
Display Modes | |
|
|