|
|
#1
01-07-2010, 04:46 PM
|
|||
|
|||
window keeps pulling seal down
As above, i changed my DS window ages ago and every time i open the window it pulls the seal on the pillar down. The weather seal is one long part, but i ended up cutting it as it was all coming down. Ive sorted the horizontal bit, but the vertical bit is annoying. Ive found i can adjust the window with a bolt behind the triangle plastic, and also a adjusting bolt under the door card. Am thinking of glueing the seal in now, would tiger seal do? anyone else have this problem?
__________________
-james d15b 1.5x JDM 
|
|
#2
01-08-2010, 12:38 PM
|
|||
|
|||
|
What do you mean cutting it? As in it's not all one piece now?
My old one used to come out when I got the car - the rubber gets a bit hard with age. I pulled the whole thing out, lathered it all in Silicone Lubricant and refitted. Was grand for years.
__________________
Mark \'91 Black SiR <- Back on the road!! \'92 Red 1.5x (sold)
|
|
#3
01-08-2010, 12:45 PM
|
|||
|
|||
|
Its in two pieces, I cut it just at the corner where the pillar meets the horizontal part of the door. My bad, i know. If i put lube on it surely it will pull down more easily.
__________________
-james d15b 1.5x JDM
|
|
#4
01-08-2010, 12:50 PM
|
|||
|
|||
|
Yeah...because it should be attached to the other piece
 Try putting lubricant inside the rubber where it holds the glass - should be less friction from putting windows up and down. Maybe a bit of super glue to hold it into the door frame.
__________________
Mark \'91 Black SiR <- Back on the road!! \'92 Red 1.5x (sold)
|
|
#5
01-08-2010, 01:48 PM
|
|||
|
|||
|
Quote:
__________________
-james d15b 1.5x JDM
|
|
#6
01-08-2010, 02:54 PM
|
|||
|
|||
|
lidl's have it now and again.I used to have it for my airsoft gear,might see it as gun oil or something but it will say silicone on it.
__________________
C=R=X
|
|
#7
01-08-2010, 04:38 PM
|
|||
|
|||
|
It's like WD40 except it has silicone in it. Good for lubricating non metal materials (and metal ones too)
Motor factors will have it,
__________________
Mark \'91 Black SiR <- Back on the road!! \'92 Red 1.5x (sold)
|
|
#8
01-09-2010, 02:28 PM
|
|||
|
|||
|
perfect, sprayed wd40 on the rubbers and the window opens as normal. didnt need glue in the end. I guess ever so often ill spray a little on it and let it work its way down the seal. Got the seatbelt changed also thanks to niall so my interior is back in place finally. bleedin road noise was annoying as hell
__________________
-james d15b 1.5x JDM
|
 |
|
|
Linear Mode
